Models
- I-40-04-SS – 4” Stainless steel, heavy-duty rotor
- I-40-04-SS-HS – 4” Stainless steel,
high-speed heavy-duty rotor
- I-40-06-SS – 6” Stainless steel, heavy-duty rotor
- I-40-06-SS-HS – 6” Stainless steel, high-speed heavy-duty rotor
DIMENSIONS
- Overall height:
- I-40-04-SS (SS-HS) – 7-7/8”
- I-40-06-SS (HS) – 10-1/4"
- Female inlet: 1” NPT or BSP
- Exposed diameter: 2”
Operating Specifications
- Discharge rate: 7.0 to 28.2 GPM
- Radius for I-40, I40-04-SS, I40-06-SS: 45’ to 70’
- Radius for I-40-04-SS-ON, I-40-06-SS-ON: 52’ to 76’
- Radius for I-40-04-SS-HS, I-40-06-SS-HS: 41’ to 65’
- Recommended pressure range: 40 to 100 PSI
- Operating pressure range: 40 to 100 PSI
- Precipitation rates: approximately 0.33” to 0.48” per hour
- Nozzle trajectory: 25˚
- Drain check valve for up to 15' elevation change
Options Available
- The turf cup kit (part # 460000) for the I-40 sprinkler allows the addition of a plug of living sod to the top of the riser. Perfect for areas where an invisible sprinkler is required. Not available for
ON model.
- Dual opposing nozzle (full-circle version) I-40-04-SS-ON, I-40-06-SS-ON
- Reclaimed water cover
- Factory-installed nozzles
|
Automatic arc return: Returns to the original arc regardless of where the
turret is turned.
Non-strippable, vandal-proof drive mechanism enables the turret to be turned without causing damage.
Full and part-circle operation in a single rotor: Helps reduce stock.
Available in plastic or stainless steel riser.
Available in 4" or 6" pop up.
Easy arc adjustment (50° - 360°)
Up, down, wet or dry with through-the-top convenience, non-reversing.
|
